1 - 12 of 12 items

AFC Banjo Bolt

AFC Banjo Bolt

AFC Banjo Bolt

  • Price: $12.00

AFC Line Upgrade Kit - Braided Stainless Steel

AFC Line Upgrade Kit - Braided Stainless Steel

1st gen 89-93 Braided AFC Line Upgrade. Replace that common to break afc line, with a braided line that will never break again. NOTE - PICTURES IS FOR MANUAL TRUCKS. Does not fit 91.5-93 automatic trucks with TPS.

  • Price: $50.00

AFC Rubber Diaphragm

AFC Rubber Diaphragm for 89-93 VE Pump.  

  • Price: $15.00

AFC Spring - Silver

Stronger AFC spring, spring is found in the early non intercooled trucks. As we increase boost pressure, a stronger spring helps in aid a proper fueling curve and more afc adjustment. If your suffering from flooding the turbo out at low boost,...

  • Price: $20.00

Bosch 4200 Governor Spring

Bosch 4200 Governor Spring

Bosch 4200 rpm Govrnor Spring 89-93.  Requires trimming or re indexing the throttle shaft

  • Price: $25.00

Bosch Gasket Kit - DGK 121

Bosch Gasket Kit - DGK 121

"This Bosch Diesel Gasket Kit contains the genuine article. It packs exactly the same superior quality gaskets specifically engineered for our OE pump. There's nothing better for restoring a Bosch system to its original condition. Isn't your...

  • Price: $25.00

Bosch VE Pump 3200 RPM Gov. Spring - 1 464 650 366

Bosch VE Pump 3200 RPM Gov. Spring - 1 464 650 366

Bosch Ve Pump 3200 rpm spring. 

  • Price: $20.00

Bosch VE Pump 3800 RPM Gov. Spring - 1-464-650-374

Bosch VE Pump 3800 RPM Gov. Spring - 1-464-650-374

Bosch 3800 RPM governor spring, 60# valve springs are recommended to avoid "valve float" This spring requires some trimming.

  • Price: $25.00

Bosch VE Pump longer afc slide pin - 1 463 105 364

Bosch VE Pump longer afc slide pin - 1 463 105 364

Longer slide pin for the Bosch ve pump. Gives more afc control and can cure some of the problems that arise with fuel pins that are cut too deep. A fuel pin that is cut too deep allows the factory slide pin to slide passed the o-ring, which causes a fuel leak.

  • Price: $20.00

THD Fuel Pin

THD Fuel Pin

The Hungry Diesel fuel pin is finally here! Made from 4140 and max hardened. This pin is properly cut, so to give maximum fueling, but not cut too deep to allow slide pin to slip past the O ring. The pin is also cut with a "flat" ramp design, as...

  • Price: $90.00

The Dominator - Power screw (longer fuel screw)

The Dominator - Power screw (longer fuel screw)

Longer Power Screw: 1 / 4" longer than The stock screw , On the internal End. NOTE: This screw can cause a runaway situation. Please understand the risk involved with turning up the power on a VE Pump

  • Price: $45.00

The Magic Bullet

The Magic Bullet

Exclusive to THD - "The Magic Bullet" Precision machined FSS fuel shutoff solenoid brass plunger for your 12v VE pump from Holy Performance! Stop fussing with torn rubber plungers and get this one for your beloved truck. Our special dimensions...

  • Price: $69.99